AGTIV® FUEL™ PEA & LENTIL

SHARE:

AGTIV® FUEL™  PEA & LENTIL

AGTIV® FUEL™  PEA & LENTIL is an inoculant used for peas, lentils and faba beans. It contains the bacteria Rhizobium leguminosarum biovar viciae.

           GRANULAR

AGTIV® FUEL™ G PEA & LENTIL is an inoculant in granular form used for precise in-furrow application for peas, lentils and faba beans. It contains the bacteria Rhizobium leguminosarum biovar viciae.

Active Ingredients-Granular

• Rhizobial inoculum: Rhizobium leguminosarum biovar viciae- 1.3 x 10⁸ viable cells/g

Storage and Handling

• Store in a cool, dry place, out of direct sunlight
• Do not freeze or expose to temperatures above 25°C (77°F)
• Avoid severe temperature variation
• Open package only when ready to use
• Respect the best before date on the label

Application Rate-Granular

AGTIV® FUEL™ G PEA & LENTIL should be placed in the seed row. Apply at a rate of 4.5 kg/ha (4 lb/acre). One 18.2 kg (40 lb) bag covers 4 ha (10 acres) or one 364 kg (800 lb) bag covers 80 ha (200 acres).

• We recommend calibrating the seeder before applying the product
• Do not mix AGTIV® FUEL™ G PEA & LENTIL with granular pesticides or fertilizers.
• Flowability may be affected by conditions of high humidity.
• To avoid flow problems, do not fill tank or seed cart completely.
• Regularly check and clean metering system to ensure proper flow.
• Do not fill boxes or tanks until ready to plant.
• Remove any unused granules from the tank or the seed cart at the end of the day.

      POWDER

AGTIV® FUEL™ P PEA & LENTIL is a peat based inoculant designed to be used with seed treating equipment. Developed with PTB160 technology, the product contains the bacteria Rhizobium leguminosarum biovar viciae.

Active Ingredients-Powder

• Rhizobial inoculum: Rhizobium leguminosarum biovar viciae- 1.6 x 10⁹ viable cells/g

Storage and handling

• Store in a cool, dry place, out of direct sunlight.
• Do not freeze or expose to temperatures above 25°C (77°F).
• Avoid severe temperature variation.
• Open package only when ready to use.
• Respect the best before date on the label.

Inoculated seeds storage

• Seeds must be kept away from direct sunlight and must not be frozen.

Directions For Use - Powder

Dry Application- Mix evenly with seeds at the bottom of the grain
auger while filling drill, or directly in the drill box. Ensure uniform seed
coverage is obtained. Peas & faba beans: apply at 300 g/ha (120 g or 4.2
oz/acre). Lentils: apply at 200 g/ha (80 g or 2.8 oz/acre).

Slurry Application - Pour one 4.7 kg pail in a clean container.
Gradually add 8 - 10 litres of clean, non-chlorinated water and stir well.
Add more water if the slurry is too thick

Used with seed treating equipment:

LIQUID

AGTIV® FUEL™ L PEA & LENTIL is a liquid inoculant used for precise in-furrow application. Developed with PTB160 technology, the product contains the bacteria Rhizobium leguminosarum biovar viciae.

Active Ingredients-Liquid

• Rhizobial inoculum: Rhizobium leguminosarum biovar viciae- 6 x 10⁹ viable cells/g

Storage and Handling

• Store the product in cool place below 20°C (68°F).
• Do not freeze or expose to intense heat.
• Wearing safety goggles and gloves is recommended.

Application Rate-Liquid

In-Furrow Application - AGTIV Liquid Injection Kit

A bladder of 8 liters covers 32 ha (80 acres).This product should be applied using the AGTIV^® Liquid Injection Kit, integrating a Dosatron^® pump. It is easy to install on your existing in-furrow application system and operates off the main solution flow. Apply directly in the seed row at a rate of 250 ml/ha (100 ml/acre).

Application rate 

AGTIV Liquid Injection Kit / IN-FURROW APPLICATION Video 

• Ensure the tank and the liquid application system are clean and free of chemical residues.
• Shake well before use and maintain a constant agitation in the tank during application.
• Calibrate the application system to deliver the correct amount of inoculant.
• Ensure the temperature of the diluted tank mix doesn’t exceed 22°C (72°F).
• Apply within 6 hours after mixing into the tank.

In-Furrow Application - Tank mix

A bladder of 8 liters covers 32 ha (80 acres). The application rate is 250 ml/ha (100 ml/acre). Dilute the inoculant in the required volume of clean, non-chlorinated water. Refer to the chart below. Apply inoculant in the furrow, directly on the seed.

• Open package only when ready to use.
• Shake well before use and maintain a constant and effective agitation in the tank during application.
• Calibrate the application system to deliver the correct amount of inoculant.
• Ensure the tank and the liquid application system are clean and free of chemical residues.
• Ensure the temperature of the diluted tank mix doesn’t exceed 25°C (77°F).
• Apply within 6 hours following mix into the tank.
• Respect the best before date on the label.

OMRI and Pro-Cert certificates

How it works

Click to Download Biological Active Ingredients

Video Resources

Mycorrhizae symbiosis establishment:

Benefits

• Rhizobium fixes Nitrogen in the nodules
• Increases root growth
• Mycorrhizal fungi produce hyphae that penetrate root cells to produce exchange structures
• Mycorrhizal fungi produce hyphae that extend into the soil and increase absorptive capacity for water and mineral nutrients (P, Cu, Zn)
• Mycorrhizal fungi improve the plant’s absorption capabilities by transferring directly to root via mycorrhizal network
• Active rhizosphere: 5cm
• Increases yield
• Increases crop quality
• Increases tolerance to drought
• Optimizes fertilizer use

Research

Pulses Efficacy Book