Do not freeze or expose to temperatures above 35°C (95°F).
Avoid severe temperature variation.
Close tightly after use.
Respect the best before date on the label.
Avoid prolonged inhalation of dust. Use of a dust mask when handling is recommended.
Mix AGTIV® REACH™ evenly with seeds at a rate of 725 ml of product/hectare (1 ¼ cup/acre). One 1.6 kg pail of product covers up to 8 ha (20 acres). It is possible to use a dry seed treater to deliver the powder (see below for details).
The product is compatible with legume inoculants.
AGTIV® REACH™ may "bulk up" seeds. It is important to calibrate the seeder to ensure correct seeding rate is attained.
When planting, avoid using AGTIV® REACH™ with wet equipment. Allow the equipment to dry and make sure that all the mechanisms and the piping of the seeder are dry. It is also possible to use a neutral absorbent to absorb excess water.
For optimum results, it is recommended to seed within 8 hours following coating with AGTIV® REACH™. Ensure proper seed-soil contact to minimize any desiccation of the mycorrhizal inoculant.
Do not mix with granular or liquid fertilizers.
Do not mix AGTIV® REACH™ and fungicide seed treatments in the same tank. Apply to seed once treatment is dry.
Dry seed treaters
A dry seed treater can be used to easily deliver AGTIV® REACH™ onto seeds. It is recommended to perform a calibration test with the device to adjust the flow rate to the drill box filling rate.